How do you clean plastic without damaging it?

How to whiten the white plastic that has become yellowish

To clean the outside of the car, the first thing to do is to wet the entire surface of the car, preferably with pressurized warm water -so that the mud softens-. With this we will be able to remove most of the dirt without complications. We must not forget the tires, the low parts of the vehicle and the exhaust pipe, since with the dirt they could rust. For this it is advisable to use a brush and soapy water.

Therefore, we will let the mud dry and, later, we will scrape carefully on the stained surfaces with a card or spatula. Once this is done, we will proceed to remove all the excess with a vacuum cleaner, so that no dirt is left in the passenger compartment. Be especially careful with leather upholstery.

If the upholstery is leather, we will have to treat it later with the leather cleaner and conditioner so that it conserves all its splendor. Finally, with the multipurpose spray for the cabin we will give a pass to the dashboard, the moldings of the doors, the rubber mats and other vinyl or plastic surfaces.

See also  Should I let my dog chew plastic?

How to clean plastic

First you can try lemon. Mix two cups of water and half a cup of lemon oil. Spray it directly on the surface, then rinse with water and wipe with a dry cloth. This will clean the plastic, remove stains and restore the shine.

Wash the clear women’s clogs with dishwashing soap, then pour a little hydrogen peroxide into a container filled with tap water. Put your transparent women’s sandals in there for a few hours and then it is important that they air dry but not in direct sunlight.

It is actually a chemical process of mixing a mixture of chemicals called “retardants” that makes it a less flammable and safer product. But it is this mixture between the polymers of the plastic and the retardants that makes the plastic turn yellow. And if you also add heat, air, natural light… All this helps this process to become even faster.

And if you are not convinced by this experiment, we are going to give you another tip, to see if this one works for you. Take baking soda and with a little bit of the set of a lemon make a paste with which you have to cover the phone case. Let it act for about 30 minutes. Then rub with a sponge to leave the case perfect as it was before. Rinse with water and ready.

See also  What are the 7 types of plastic?

How to clean scratched clear plastic

Some types of plastic are easily soiled and sticky to the touch, as well as accumulate dust and other debris on its surface. This is a rubbery plastic used in the finishes of a myriad of objects, from electronic device cases to some car parts to beauty tools. If you find yourself in this situation and want to know how to clean sticky plastic, pay attention to this unComo article.

Even so, the most appropriate product to clean rubbery plastic that has become sticky is ammonia. And among the many uses of ammonia, its cleaning and degreasing properties stand out, so it will be ideal to leave this type of plastic clean.

It is also important to clean this type of plastic in a ventilated area, since ammonia gives off vapors that are toxic if inhaled directly. In case you want to clean surfaces or elements inside your vehicle, you must first open all the doors to ensure air ventilation.

See also  How do you cut a fabric template?

How to clean clear plastic tablecloth

The use of an impregnation spray is essential so that you can protect your synthetic leather sofa from stains, dirt, etc. from day one. Special grease and oil-free sprays are available for cleaning synthetic leather. Unlike genuine leather, imitation leather has no pores that greasy care products can penetrate. Therefore, these sprays only leave an unattractive coating on the surface.

We hope our tips will help you clean faux leather – check out our exclusive selection of beautiful faux leather sofas, chairs and armchairs! Now you know the best way to clean them!