How to revive the color of plastics
Despite being durable, black plastics (especially on vehicle bumpers and trim) have a tendency to dull and fade over time. Fortunately, you can easily restore the plastic’s natural luster. You can make the plastic look like new by applying a coat of olive oil or using a hot air gun on the dulled areas. If this doesn’t work you can use a spray of black paint to bring the plastic back to a shiny shine.
Restoring sunburned plastics
Soft plastics: Use a microfiber cloth soaked in rejuvenating liquid and rub with gentle circular movements. If the plastic of your dashboard is rough, apply the cleaner using a cotton towel as it adapts better to the surface and cleans more thoroughly.
Engine compartment: This type of plastics are dirtier. Do the same as in the case of hard plastic, but when you apply the cleaner, leave it to act for at least five minutes. Make circular and soft movements, this way the product spreads better and you get to recover the original shine.
Soft, hard and engine compartment plastics: If once you have applied the rejuvenator you have not achieved sufficient shine, spread a thin layer of plastic wax with a chamois and rub gently to achieve a better result.
Plastic rejuvenator
You may have at home the best toilet seat of the moment (In this link you can find several products to analyze), however, this does not prevent the gradual loss of its brightness and whiteness. In any case, you should not worry about it, but you should get to work to solve this situation. In this regard, it is important that you know, first of all, why the material becomes yellowish. So, later we will tell you some effective recipes to eliminate that annoying color of the toilet seat.
Now that you know the possible causes of premature deterioration of the toilet seat, you will need to put into practice some recommendations that will restore its whiteness and brightness in the blink of an eye. The two products to use are bleach and salfuman, which have highly effective active bleaching properties. These two substances are easily available in any department store, but should be handled with an appropriate level of caution.
Especially, keep in mind that their inhalation in a space with limited air flow could cause serious poisoning. In addition, when using them you will have to wear gloves and in the specific case of salfumán use a mask. Here are some mixtures to bleach your toilet:
Homemade plastic resurfacer
The sheer number of WPC decking options available can be overwhelming. You’re not just choosing between light brown and dark brown. From incense to warm sienna to sand to burnt umber, there are dozens of shades with different hues, each evoking a different mood.
No matter what type of deck you decide to install, you will definitely experience occasional surface soiling. We recommend that you use a soft bristle brush and soapy water to clean it.
Although general cleaning of the WPC deck surface should not become an obsessive act, regular washing helps it to avoid the accumulation of bird droppings, pollen and any possible dirt.
Using a proper compound cleaner is crucial to the longevity of your WPC deck. When buying a deck cleaner, always check the label. Never use one that is chlorine-based. Ideally, use a mixture of soap and water.
We insist: soap is enough. However, if you are one of those obsessive people who want your deck to shine like a show car, we recommend using cleaners with sodium percarbonate because they create a particular type of bubble when mixed with water, which dissolves and ensures that any organic material on the deck is completely cleaned.