Tarquinia can be applied on a painted wall.
Painting is a great solution for renovating furniture, such as terrace and garden furniture. And to change the look of objects and other surfaces. Learn how to paint plastic and what kind of products are ideal for these tasks. And if you go for the spray option, you’ll save time!
You can use common sprays suitable for indoor and outdoor use, as they are usually suitable for the most common surfaces, including plastic. In Leroy Merlin stores you will find a wide range of products, in many colors and finishes, such as matte or satin. For example, Luxens decorative sprays, whose paint is washable and has a minimum drying time of half an hour.
1.6. Wait for it to dry and spray again until a new coat is applied. In this way you will be able to go over the entire surface and avoid drips. Repeat this operation as many times as necessary to achieve a perfect coverage. The drying time will depend on the manufacturer: 2 hours maximum.
How to apply plastic coating by roller
Moisture in walls, besides being an aesthetic evil that affects the whole room, can also cause health problems and negatively affect the comfort and welfare of the inhabitants of the home. In addition, it is advisable to eradicate the problem as quickly as possible and repair the damage. In the following unComo article we show you some simple tips so you know how to paint a damp wall. Its effectiveness is excellent and you will never again have to worry about the appearance of damp stains on the walls.
Before you start painting the wall, it is necessary to find out and determine what is the cause of the moisture. There are different types of moisture (seepage, condensation and capillarity) so its origin may be due to several factors:
However, in many cases and most frequently, a large damp stain appears on the wall, due to condensation of water vapor. This usually happens in cold rooms, not very sunny and with a high degree of humidity in the environment. In this case, it is essential to remove the stain to subsequently paint the wall and get an excellent result. We explain how to do it below.
The tarquini is used for humidity
Over time, both the tool and the material used for plastering evolved and, with the advent of the Industrial Revolution and the advent of machine tools and cheap steel, trowels began to be mass-produced, reducing their cost and increasing their quality.
The talocha or trowel is a versatile tool, mainly used to apply plaster to walls. It consists of a flat surface – usually made of steel plate – whose edges can be smooth or, alternatively, smooth and serrated.
It is used to apply fine plaster to the walls of a house, whether internal or external. They are also used to make a special type of plaster, called salpicré or salpicrete, which requires greater skill and care.
Another practical use is to seal plaster when it is necessary to make a perforation or repair; finally, when it is necessary to repair cracks in a wall or to apply enduro (stucco glue), the talocha allows a neat and uniform application of the material.
It can be applied over paint
Stucco is a fine-grained paste composed of slaked lime (normally, fatty air limes), pulverized marble, plaster, natural pigments, etc., which hardens by chemical reaction when the calcium hydroxide in the lime comes into contact with carbon dioxide (CO2) [Ca(OH)2 + CO2 → CaCO3 + H2O] and is mainly used for plastering walls and ceilings.
Stucco admits numerous treatments, including modeling and carving to obtain ornamental shapes, polishing to give it a marble-like appearance, and polychrome painting for decorative purposes.
The term stucco comes from the Italian stucco; it is a form of finishing or decoration of walls and ceilings, interior or exterior, based on paints and different types of mortars that allow obtaining different textures. Given its versatility, it adapts to any type of construction or period. In addition to its decorative function, it reinforces the wall and waterproofs it, allowing natural transpiration.
The most famous stucco is Venetian stucco, also called “Venetian luster”. It is a coating that was invented in Venice (Italy) at the beginning of the 15th century. Its finish shows a flat, smooth and shiny wall like a polished marble, with different shades of color, of great beauty.